The special pump for the fountain, the outer casing, the over-current parts and the external parts are made of cast iron or stainless steel (304, 316, 316L), and the product retains the original pump-specific pump performance. The suction tube and pump must be filled with liquid before the pump is turned on. After the pump is turned on, the impeller rotates at a high speed, and the liquid rotates with the blade. Under the action of the centrifugal force, it flies outward from the impeller, and the liquid that is ejected gradually slows down in the pump chamber, the pressure gradually increases, and then the pump At the exit, the discharge pipe flows out.
The fountain pump has its outer casing, over-current parts and external parts made of cast iron or stainless steel (304, 316, 316L), and the product retains the original pump-specific pump performance.
1. Use cast iron or stainless steel to improve the corrosion resistance of the pump.
2. The impeller uses special materials to prevent the impeller from loosening when the impeller is used. Fountain special pump
3. Leakage protection measures: use a constant potential grounding device.
4. On the basis of the original ordinary pump, according to the requirements of the special pump for the fountain, the company has undergone many tests and continuously developed in technology, and the processing materials have been continuously improved, so that the special pump for the fountain can be started frequently, which is completely suitable for the use of the musical fountain.
5. The pump adopts stainless steel strainer shield and three-phase four-wire cable.
6, stainless steel fountain pump for automatic water injection.
7. The motor is self-circulating and water-filled.